A storage solution that is boxed and ready to build
Maximises storage in compact spaces
Lockable sliding doors
Strong, attractive Smartspan® cladding
Off-The-Wall Garden Shed Options
See The Features Of The Handi-Mate Off-The-Wall Shed
Handi-Mate Off-The-Wall Shed's Sizes
Handi-Mate Off-The-Wall Shed Dimensions
| Model | Width | Depth | Wall Height |
| HM1 | 1.82m | 0.81m | 1.90m |
| HM3 | 2.17m | 0.81m | 1.90m |
Handi-Locker Off-The-Wall Shed Dimensions
| Model | Width | Depth | Wall Height |
| HML | 2.87m | 0.81m | 1.90m |
Dimensions are wall height and (approx.) roof size. Width and Depth are measured to the outside of the roof. Internal dimensions differ.
Handi-Mate Off-The-Wall Shed Packaged Dimensions
| Model | Weight | Height | Width | Depth |
| HM1 | 50kg | 110mm | 2185mm | 845mm |
| HM3 | 55kg | 110mm | 2185mm | 845mm |
| HML | 69kg | 110mm | 2185mm | 845mm |
Available Colours
Filtering products
Frequently Asked Questions About Handi-Mate Off-The-Wall Garden Sheds
Yes – this shed is designed to be fixed flush against a masonry wall, which replaces the rear panel. Proper anchoring ensures stability and weather resistance.
The shed is DIY-friendly and comes with a step-by-step installation guide & video. If you're comfortable using basic tools and anchoring to brick or concrete, installation is straightforward.
This shed is designed for sturdy, masonry surfaces like brick or concrete. Timber, cladding or lightweight walls are not recommended without structural reinforcement.
The shed requires secure fixings into the masonry wall, but with proper installation, it won't cause damage. You may want to consult your builder first if you are installing on heritage, stone, plastered, or rendered walls.
We recommend applying a waterproof silicone sealant where the shed meets the masonry wall, especially in high rainfall areas or for older, uneven masonry. In severe open environments, an additional wall-to-shed apron flashing could be ordered and installed to reduce the risk of water ingress.
The shed features an angled roof to direct water away from the attached wall. Designed to suit Australian homes' standard eaves sizes, there will be minimal risk of water penetrating the shed when installed under house eaves. In severe open environments, an additional wall-to-shed apron flashing would be recommended to reduce the risk of water ingress.
Yes – the HM1 and HM3 model sheds come with a lockable handle with keys. The HML model has a hasp and staple lockable double door.
In many cases, small sheds under 10m2 may not require council approval. However, always check your local regulations before purchase.
No - there needs to be solid and secure footings underneath the shed, like a concrete pad or path, that the shed can be anchored to.
